A home water filter is an excellent way to improve the water in your home. There are several types of filters available on the market. Some of them are Activated carbon, Reverse osmosis and UV systems. These types of filters are ideal for removing toxins, lead and pesticides from your water.
Activated alumina
Activated alumina is a popular technology for removing fluoride from water. Activated alumina works best at a pH level of 5.5 to 6.5. However, it will function at higher levels as well. For this reason, you should be sure to buy a home water filter with NSF certification. These filters are made to meet strict safety standards.
A point of use activated alumina home water filter will produce one gallon of treated water per minute, depending on the size of the filter and the water pressure at your home. A point-of-entry unit can produce up to ten gallons per minute. Both types of units can be used in parallel, if needed. In addition, the capacity of each filter depends on the amount of alumina in the filter.
Activated carbon
Activated carbon home water filters are made up of small carbon particles that are porous, allowing them to capture and remove contaminants. They have a huge surface area and can hold large amounts of pollutants. One pound of activated carbon has a surface area that is equivalent to one hundred acres of land, or about three times the size of the Pentagon. The material is also used in respiratory masks, air conditioning units, and exhaust fans to remove odors from the air.
Activated carbon home water filters have a variety of benefits, including the ability to remove common agricultural chemicals. Herbicides are common on the land and in water, and can easily find their way into groundwater aquifers. These chemicals can have short and long-term adverse effects on aquatic life.
Reverse osmosis
Reverse osmosis home water filtration systems remove a wide range of contaminants from water. These filters can remove bacteria, heavy metals, and other contaminants. They can be installed as stand-alone filters or with filtration fittings that fit into your faucets. These systems are available in almost any home improvement store.
Reverse osmosis home water filter systems typically include remineralization media. Even though reverse osmosis leaves water completely pure, it can still be lacking in the minerals our bodies need. The added minerals, such as calcium and magnesium, can help make water taste better and improve its pH level.
Reverse osmosis home water filter systems need periodic maintenance. The frequency will depend on the type of filter and the quality of the water entering the filters.
Inline filters
Inline filters for home water filters use water pressure to trap contaminants along the way. This type of filter is activated by a faucet or ice maker, and it filters water before it reaches its final destination. Using an inline filter only takes a few seconds. It can be installed under a kitchen sink or behind a refrigerator.
These filters are designed to remove the worst contaminants in the water. These include bacteria and chlorine. Choosing a filter that reduces these contaminants will give your family clean water without adding a lot of extra costs. Some filters can remove as much as 99.9% of bacteria and chemicals, but this is a low-cost option for busy families.